KN95 Respirator Face Masks Cool Flow for Smoke, Dust, Virus

Additional Information:

How to properly fit the Mask:

PLEASE WASH YOUR HANDS PRIOR TO HANDLING YOUR MASK and AFTER REMOVING YOUR MASK.

1. Place the respirator against your face with the nose-piece across the bridge of your nose. Hold the respirator on your face and position the respirator under the chin.

2. Pull the top strap over the head resting it high at the top of our head.

3. Pull the bottom strap over your head ,position it around the neck below the ear.

4. Place the fingertips of both hands at the top of the metal nose-piece, pinch the nose-piece. Pinching the respirator nose-piece to mould on to the bridge of your nose.

5. The seal of the respirator on the face should be checked before proceeding . Inhale sharply. If air leaks around the nose bridge, re-adjust the nose-piece as described in step 4.

6. MASKS CAN BE REUSED IF USING FOR A SHORT PERIOD OF TIME OVER A FEW DAYS. ENSURE THEY REMAIN DRY AND IN GOOD CONDITION. ONCE THEY BECOME DAMP DO NOT RE-USE.

IT IS VERY IMPORTANT TO PRESS THE NOSE-PIECE FIRMLY TO THE BRIDGE OF THE NOSE TO FORM A GOOD SEAL.

Do not use for:

Gases and vapours, oil aerosols or sandblasting, particulate concentrations that exceed either 10 times the occupational exposure limiter applicable government regulations, whichever is lower. Do not use in atmospheres containing less than 19.5% oxygen, as this does not supply oxygen.

Wearing a face was is not an iron clad guarantee that you won’t get sick – viruses can also transmit through the eyes and tiny viral particles, know as aerosols, can still penetrate masks.  However, masks are effective at capturing droplet, which is the main transmission rout of a virus, and some studies have estimated a roughly five-fold protection versus no barrier. If you are likely to be in close contact with someone infected, a mask cuts the change of the disease being passed on.  If you’re just walking around the town and not in close contact with others, wearing a mask is unlikely to make any difference.

Use limitations and warnings:

• The wearer must properly fit and test before using this respirator.

• Do not use this respirator when concentrations of contaminants are immediately dangerous to life or health.

• Leave the contaminated area immediately if breathing becomes difficult, or dizziness or other distress occurs.

• Discard and replace respirator if it becomes damaged , moist or breathing resistance becomes excessive.

• Inspect respirator before each use to ensure it is in good working condition. Examine all the respirator parts for signs of damage including the two straps and nose clip and valve.

• Do not alter, wash, abuse or misuse this respirator.

• Do not use with beards or heavy facial hair or other conditions that prevent a good seal between the face and the sealing edge of the respirator.

• Make sure the respirator in not crushed or squeezed by an outside force, as this may result in the deformation and damage of the respirator.

• Maximum operating temperature: +50 degree Celsius.

• Care should be taken when using the respirator at low temperatures as excessive moisture may cause valves to freeze.

• This respirator contains no components made from natural rubber latex

Maintaining effective protection:

• Change the mask when it becomes moist.

• Wait until you are in place with cleaner air quality before removing the mask.

Weight: 0.010 kg

Size: 12 x 12 cm

Disclaimer

• Face masks are not advertised as or claimed to be medical or surgical masks, or for use in medical facilities and are meant to be used in combination with a surgical/medical mask to extend its service life by adding relatively effective extra layers of protection. Proper mask use and hand washing hygiene must be exercised by the user at all times.

• Wear a mask if you are coughing or sneezing.

• Masks are effective only when used in combination with frequent hand-cleaning with alcohol-based hand rub or soap and water.

• If you wear a mask, then you must know how to use it and dispose of it properly.

• Before putting on a mask, clean hands with alcohol-based hand rub or soap and water.

• Cover your mouth and nose with the mask and make sure there are no gaps between your face and the mask.

• Avoid touching the mask while using it; if you do, clean your hands with alcohol-based hand rub or soap and water.

• Replace the mask with a new one as soon as it is damp.

• To remove the mask remove it from behind (do not touch the front of the mask); place your mask in a safe location where it can be ready to wash or hang up to be re used, clean hands with alcohol-based hand rub or soap and water before and after you handle your mask at all times.

• You can wash and reuse these masks.

• These specific masks do not have filters or the option to use filters.